(+39) 039 99821
Subfamily Name Short Description Image
OH1 AC-E Long coupled horizontal single stage centrifugal
pumps with dimensions and characteristics as per
DIN 24255 - EN 733.
AC-E pumps are available either in bare shaft execution or with baseplate, with or without motor.
Pumps ar
VS4 ACV-E Vertical single stage centrifugal pumps derived from DIN 24255 (ACV) Norms. The casing is always immerged in the liquid, while a discharge pipe brings the discharge branch to the outside of the plate covering the pit. The standard shaft length varies
  • ACV-E
VS2-VS7 C2KV C2KV and C2KV-N pumps are double suction twin volute vertical wet pit pumps specifically designed for oil pipelines and petro-chemical applications. They are designed according to API 610, latest edition norms. Thanks to their specific construction,
  • C2KV
BB1 C2POH C2PO heavy duty process pumps are horizontal, between bearings, with axially split casing, double suction, one stage impeller (BB1 configuration) , in full compliance with API 610 std., latest edition (ISO 13709). The specific pump construction allow
  • C2POH
DOUBLE STAGE CDS - NP Two stage liquid ring vacuum pumps series CDS and NP suitable for deep vacuum applications. CDS is a compact line designed to minimize the floor space requirements by offering short and integrated bearing brackets in combination with the motor suppor
  • CDS - NP
VS1-VS6 CKVN CKVN - CKVN-B are vertically-suspended, single or multi-stage centrifugal pumps (VS1 or VS6 configuration), designed and built in full accordance with API 610 norms. Bowls are integrally cast diffuser type to assure optimum hydraulic efficiency and m
  • CKVN
VS4 CKVT CKV are vertically-suspended, single or multi-stage centrifugal pumps (VS4 configuration). Bowls are integrally cast diffuser type to assure optimum hydraulic efficiency and minimum radial thrust. A generously sized, carefully designed line shaft ass
  • CKVT
SINGLE STAGE DEX The DEX line is the extension of the FindeR LEX/MEX series. DEX pumps are designed to handle bigger inlet capacities. The impeller construction is “in between bearing” and the gas streams are collected from both pump ends through common i
  • DEX
OH2 DUAL PEP Patented two stages overhung pump using two low flow design impellers in back to back configuration enclosed in a radially split, barrel shaped, centerline supported integral casing, maintaining the end - top nozzle configuration. Dual PEP pump meets
  • DUAL PEP
OH1 HC Radially split centrifugal pumps with close impeller complying with ISO 2858/DIN 24256/ISO 5199 Norms. A sturdy and deep stuffing box allows to fit single or double, either conventional or cartridge design mechanical seals. Upon request, they can be
  • HC
MAGDRIVE HCMD Single volute hermetically sealed pump thanks to the replacement of the traditional mechanical seals with magnetic device.This solution allows a substantial reduction of maintenance interventions and, consequently, of the running costs. All the parts
  • HCMD
VS4 HCV - VXV Vertical single stage centrifugal pumps derived from ISO 2858/ DIN 24256 Norms. The casing is always immerged in the liquid while a discharge pipe brings the discharge branch to the outside of the plate covering the pit. The standard shaft length var
  • HCV - VXV
BB2 HPD - HPE - HPE-DS Single and two stage between bearing process pumps designed and manufactured according to API 610, 11th ed.
HPD are single stage double suction radially split casing pumps.
HPE are two stage pumps with either single or double suction fir
BB3 HPM HPM process pumps are two-stage, axially split, volute type pumps with single or double suction 1st stage impeller, fully designed according to latest edition of API 610 Std. Casing is axially split; suction and discharge nozzles are integrally cast
  • HPM
HPMB The HPMB line barrel pumps are multi-stage, designed and manufactured according to API 610, XI edition, and are suitable for heavy duty applications in the oil and gas, refining and petrochemical industry, for power plant boiler feed water, water inj
  • HPMB
OH2 HPP The HPP pumps are designed and manufactured according to API 610, 11th edition and are suitable for heavy duty applications in the oil and gas, refining and petrochemical industry. Designed to run at
  • hpp
OH2 HPPMD HPPMD and PEPMD pumps are designed and manufactured in full accordance with the API 685 (Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry, 1st edition October 2000) norms. Hydraulics are directly derived from the API 610
  • HPPMD
VS4 HPV API 610 vertically suspended, single casing volute, line shaft driven VS4 type, sump pump. Single piece shaft in standard construction. Line bearings available in different materials, depending on pumped fluid an operating conditions. Either oil or g
  • HPV
VS1-VS6 HPVT HPVT are vertically-suspended, multi-stage centrifugal pumps designed and built in full accordance with API 610 norms.
Available either in VS1 or VS6 configurations, depending on the characteristics of the pumped liquid and given conditions of
  • HPVT
OH3 L-BPEP The L-BPEP is a two stages overhung pump using two  low flow design impellers in back to back configuration  enclosed in a radially split. 
Nozzle arrangement available in several configurations.
The L-BPEP meets API 610 11
  • L-BPEP
SINGLE STAGE LEX - MEX LEX/MEX are two different versions of the same pump. LEX pumps are fitted with a special supporting bracket which connects the pump to the electric motor. The flanged end of the bracket allows the connection to any IEC motor in B5 construction or, wh
  • LEX - MEX
OH3 LHVN LVN and LHVN are process pumps, single stage, vertical in-line overhung type, (OH3 and OH4 configurations), fully complying with API 610 Std. (ISO 13709), latest edition. The pump casings are radially split, with in-line nozzle arrangement. Larger si
  • LHVN
OH3 L-PEP L-PEP centrifugal process pumps are single stage overhung radially split casing (OH3 configuration) pumps,  specifically conceived and designed for heavy duty applications in the oil and gas and petrochemical industry,  in order to complete
  • L-PEP
PDV Vertical, heavy duty, duplex piston power reciprocating pump provided with the following features:
- disk valves for differential pressures up to 21 bar
- wing valves for differential pressures above 21 bar
- horizontal electric mot
  • PDV
OH2 PEP Radially split single stage centrifugal pumps having constructive features identical to the HPP line, with the exception of the open impeller. The specific construction allows the pump to run with no back-flow, with a totally stable curve and with ve
  • index_img01
OH2 PEPMD HPPMD and PEPMD pumps are designed and manufactured in full accordance with the API 685 (Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry, 1st edition October 2000) norms. Hydraulics are directly derived from the API 610
  • PEPMD
TWIN SCREW RR Designed and built in accordance with API 676 norms, Cerpelli' RRLO represent the evolution of 100 years of experience in the field of design and construction of twin screw volumetric pumps. The pumps are self-priming and can convey fluids containing
  • RR
OH1 ULN - UHN Single-stage centrifugal process pumps, available in a variety of constructive materials to suit various applications and equipped with single, double or cartridge mechanical seals.
The pumps are characterized by a different execution of the i
  • ULN - UHN
VS4 V-PEP The pumps belonging to the V-PEP series are API 610 compliant vertically suspended, single casing volute, line shaft driven VS4 type centrifugal sump pumps suitable for small capacity and medium to high head, ranging from less than 1 up to 35 m³
  • V-PEP
SINGLE STAGE VPM VPM series are monoblok type which means that the pump is fixed straight to the motor flange and the pump impeller fitted directly on the motor shaft. This version makes the pump extremely compact suitable to be installed on OEM equipment. Motor opti
  • VPM
OH1 - VORTEX VX Radially split single stage pumps with vortex impeller which allows for certain sizes to handle liquids with suspended solids having a size up to 80% of the nozzle diameters. The packing gland allows the installation of mechanical seals and packing r
  • VX


Business Divisions

Enginered Solutions

Industrial and Power Solutions: centrifugal

Industrial and Power Solutions: vacuum

Aftermarket

Contact Us
  Finder Pompe S.r.l.

Via Bergamo 65 - 23807 Merate
(Lc) - Italy
P.IVA IT00184130136

Tel : (+39) 039 99821